플레이봇 : 햄스터 로봇

The Hamster robot is a small and lovely robot for software education. It includes various devices as shown in the following figures.

• To turn on the power, turn the power switch up to the ON position.
• To turn off the power, turn the power switch down to the OFF position.

• The Hamster robot can be charged using the charger for smartphones. You can connect the micro USB plug to the charging port (socket) of the Hamster robot.
• You can also charge using a USB cable. You can connect the micro USB plug of the USB cable to the charging port (socket) of the Hamster robot, and connect the other end to the USB port (socket) of the computer.
• During charging, the charging indicator lights in red, and when charging is complete, the charging indicator turns off.
• Once fully charged, it can be used for about an hour. (30 minutes charge, average 1 hour continuous operation, standby up to 12 hours)
• It is better to turn off the power and charge it.

• Slow blinking in blue
  Waiting for a Bluetooth connection.
  When the Hamster robot is turned on, the Bluetooth connection indicator blinks slowly in blue.
• Steady blue
  Bluetooth connected.
  When connected to the PC or smartphone via Bluetooth, the Bluetooth connection indicator stays on.
• Fast blinking in blue
  Receiving data.
  While receiving data from the PC or smartphone, the Bluetooth connection indicator blinks rapidly in blue.
• Indicator off
  The robot is turned off.

• Steady red
  Charging
• Indicator off
  Charging is complete.
• Blinking in red
  Almost no battery left in the robot.
  If the battery of the Hamster robot is almost empty, the charging indicator blinks in red. In this case, please be sure to charge.
  

• Manufacturer: Robomation / Republic of Korea
• Dimensions: Width 35mm x depth 40mm x height 30mm
• Weight: 30g (own weight without decoration)
• Sensors
  • Front proximity sensor (infrared sensor) x 2: Left/right, 1 to 30cm, 100 measurements per second, 50 transmissions per second
  • Floor sensor (infrared sensor) x 2: Left/right, reflective photo interrupter, 100 measurements per second, 50 transmissions per second
  • 3-axis accelerometer: 2g, 4g, 8g, 16g range setting, 7.81 to 1000Hz band width
  • Brightness (light) sensor: 0 to 65,535 Lux, 10 measurements per second
  • Internal temperature sensor: -40 to 87.5 degrees Celsius, 0.5 degree of precision
  • Battery voltage sensor: 0.01V precision
• Effectors
  • DC geared motor x 2: Left/right, PWM 100 steps, maximum movement speed 10cm/sec, planetary gear
  • LED x 2: Left/right, 7 colors (RED, GREEN, BLUE, CYAN, MAGENTA, YELLOW, WHITE)
  • Buzzer: 1 to 167772.15Hz, monotone, 0.01Hz precision
  • Note: 88 keys, A3 to A7, 12 temperament, +/- 0.1cent precision
• External I/O extension: Only one mode per port A/B, changeable during operation
  • Auxiliary power: 2 pins, power output, on/off possible
  • Digital input x 2
  • Analog (ADC) input x 2: 8 bits, 0 to 3.6V
  • Digital output x 2
  • PWM output x 2: 255 steps
  • Analog servo output x 2: 0 to 180 degrees
• Communication: Bluetooth 4.0 BLE, range within 15m
• Transmission speed: 20 msec (50 times per second)
• Battery: Li-Poly, 3.7V, 120mA, 30 minutes charge, average 1 hour continuous operation, standby up to 12 hours
• Charging port: Micro USB charging port, 5 pins, smartphone/tablet charger compatible
• Power management: Slider switch, power on/off
• Battery level: Available when connected to a smartphone/tablet

1. 햄스터 로봇
2. USB 동글

1. 소프트웨어 설치
2. 로봇과 PC 연결
3. 소프트웨어 실행